Pollution Controlling Equipment

1.Dust Collection Unit

Dust Collection Unit

A Cyclone & dust collector is a system used to enhance the quality of air released or pre-separators from industrial and commercial processes by collecting dust and other impurities from air or gas. Designed to handle high-volume dust loads, a dust collector system consists of a blower, dust filter, a filter-cleaning system, and a dust receptacle or dust removal system. It is distinguished from air cleaners, which use disposable filters to remove dust.

Dust collectors are used in many processes to either recover valuable granular solid or powder from process streams, or to remove granular solid pollutants from exhaust gases prior to venting to the atmosphere. Dust collection is an online process for collecting any process-generated dust from the source point on a continuous basis. Dust collectors may be of single unit construction, or a collection of devices used to separate particulate matter from the process air. They are often used as an air pollution control device to maintain or improve air quality.

Fume and smoke collectors are used to remove sub-micrometer-size particulates from the air. They effectively reduce or eliminate particulate matter and gas streams from many industrial processes such as welding, rubber and plastic processing, high speed machining with coolants, tempering, and quenching.

VIRA Engineer’s cyclone dust collector also called the centrifugal dust collector, it is mainly in ventilation dust removal and material recycling system of mining, metallurgy, refractory, coal, chemical and electric power industries, especially suitable for the initial purification for high temperature flue gas.

There are various size and type of Cyclone Dust Collector unit for pre-separators and dust free air realize as per applicable we are offer it.

  • Single Cyclone and Dust Collector unit
  • Multi Cyclone unit (For Separation)
  • Mobile Dust Collection unit.(For Material handling unit)
  • Cylinder type dust Collection unit
  • Square type Bag Filter unit,
  • Pulse jet Dust collector.
  • Jacket type Cyclone and Dust Collector,

2.Wet Scrubber

Wet Scrubber

Wet Scrubbers are effective air pollution control systems for removing gasses and/or particles from modern fumes streams. Wet scrubber work by introducing the dirty gas stream with a scouring liquid - typically water. Gasses or Particulate are gathered in the scrubbing liquid. Wet scrubbers are generally the most appropriate air contamination control device for gathering both gas and particulate in a single system.

Pollution Systems offer a many types of Wet Scrubber systems, especially designed for your procedure application. Many important operating variables are considered when assessing the size and kind of scrubber for any particular application. We will work with you and use our experience and information to give the most possible solution for your procedure.

VIRA Engineering’s wet scrubber systems consist of a ductwork, scouring vessel and fan system, mist eliminator, pumping (and possible reuse system), spent scrubbing fluid treatment and an exhaust stack. Current controls are used to monitor the system and make any fundamental changes. As per our Experience we can give you successfully Pollution controlling system.

Wet Scrubbers are essential in many industrial applications including pollutant reduction at petroleum refineries, corrosive assembling plants, chemical procedures and steel making, mineral Processing ext.

Contact Details

Key Person

Dik Patel

Register Office Address

19,Anuradha Shopping Center, Near G.E.B Office,Dehgam-382305,Gujarat,India.

Factory Address

Panchratna Estate,Phase – 4 , Near Ramol bridge,GIDC, Vatva, Ahmedabad, Gujrat, India.

Mobile No:
+91 9099011372,+91 9725053411
viraengineering007@gmail.com , info@viraengineering.com , dikpatel90@gmail.com